|
| |
Disintegrator Models
Over 50
disintegrator systems to choose from...
Table and Base
Specifications
• Ground cast iron surface with coolant
spill trough and drain
• T- slots for holding parts
• Steel-framed cabinet has heavy-duty ball
bearing casters and levelersModels
pictured below from left to right
MODEL 2 SE
• Single Arm Superstructure • Semi-Automatic
Feed • 19" x 19" work top
See other 2-SE Series Models in chart below.
MODEL 2-SAT
• Single Arm Superstructure • Auto Feed •
Convenient Lift Rack • 32" x 32" work top
See other 2-SA Series Models in chart below
MODEL 2-DVQT
• Vertical-plane Double Barrel
Superstructure for rigidity • Convenient
Lift Rack. • Auto Feed • 32" x 32" work top
See other 2-DV Series Models in chart below
|
|
Models pictured below from left to right
MODEL 1-SVQT
• Q Head with AutoFeed • Up-Front Control
Module
Other S-Series models in chart below
MODEL HK-6VQT
• Our largest table • Up-Front Control
Module
SEE ALSO: HK-10QT and 10-SG
|
Table and Base Specifications
• Ground cast iron surface with coolant
spill trough and drain
• T- slots for holding parts
• Steel-framed cabinet has heavy-duty ball
bearing casters and levelers |
Model
HK-10QT our most fully equipped model.
This versatile, rugged machine features a
motorized head carriage, up-front fingertip
controls, a big 4000-lb capacity table, our
heavy-duty "Q" head, and heavy-duty power
supply with multiple heat settings.
|
|
A.
Transistorized Automatic Feed with
Amp Sensing for optimal performance
B.
Main Control Module right at the head gives
you eye-level, fingertip control of all
major functions
C.
Massive, 60" high superstructure with 4.5"
column and motorized vertical and horizontal
rack movement with variable-speed crossarms
for precise head positioning.
D.
Large 51 x 39.5" ground, cast-iron work
surface with 8 3/4" T-slots
E.
Vertical duplex crossarms for reach,
rigidity, and control |
Special
machines
Electro Arc frequently responds to special
needs by building custom machines, table
tops, and workholding fixtures for
industrial clients. Our full-time
engineering staff is available for
consultation at your location.
|
 |
Model 10-SG (Special)
|
Power Supplies
|
 |
3 KVA, 10 KVA, 15
KVA, 20 KVA
Larger diameter holes require more power to
maintain an effective arc.
3 KVA disintegrates taps up to 3/8" in
one single pass.
10 KVA disintegrates taps up to 3/4"
in one single pass.
15 KVA disintegrates taps up to
1-1/4" in one single pass.
20 KVA designed for larger taps,
drills, studs, and bolts. |
|
Electro Arc Molybdenum Electrodes are Unique
Electro Arc Metal Disintegrators can use
any material that conducts electricity as an
electrode. However, different materials
offer varying levels of efficiency in the
process.
It is important to use an electrode
material that breaks down less than the work
piece. Materials with low melting points,
such as copper, erode as rapidly as the work
material, requiring frequent replacement,
which adds to your labor cost.
Because their high melting temperature
out performs other electrode materials,
Electro Arc recommends - and provides -
molybdenum electrodes in a variety of shapes
and lengths; round, square, and hex cross
section; lengths in 6", 9", or 12". A 12"
length can remove 35 to 40 taps. |
|
|
|
|
RJM
Engineering Supplies Pty Ltd
