Abrasive Bristle Brushes
Cup-Brush
|
Our
Abrasive Bristle brushes offer a new concept in final machining. They
are manufactured using nylon filaments which have been thoroughly
impregnated with a silicon carbide at the point of extrusion. The
combination of different grits; the natural properties of strength,
chemical resistance, stiffness, fatigue resistance, durability and high
melting point, all combine to produce some extraordinary results.
Our Abrasive Bristle brushes
deliver a consistent finish and a uniform rate of cut. They are
non-loading, non-glazing.
Abrasive Bristle brushes are available
as:
 |
 |
 |
 |
| End Brushes |
Wheel Brushes |
Cup & End
Brushes |
Tube Brushes |
|
| |
|
|
Bristle Brush - Plain
Available in Synthetic & Natural materials in various
diameters of Bristle and length. Can be made upto any size and shape as
mentioned in Grit Table at the bottom of this page. |
| |
|
Cylinderical
Circular Brush |
Abrasive Bristle Brushes
Abrasive Bristle brushes characteristics are such
that the filaments flex at all angles when in contact with the work
surface, fitting the contours of the item being worked. Pads, belts and
wheels cannot deliver the same.
For hard-to-reach areas, profiling, deburring, polishing and all
forms of product finishing, the abrasive bristle brush is suitable for a
whole range of applications that other brushes are incapable of solving.
Outstanding features and advantages of these
brushes includes:
- a cutting action caused by the nylon filaments being impregnated
with silicon carbide.
- uniform abrasive action ensured by the unique construction of
the filament.
- high elasticity and flexibility without danger of breaking.
- residues will not clog up to the fill material.
- low absorption rate renders the product suitable for both wet
and dry applications.
- good resistance to weak acids and bleaching solutions.
- trimming of the fill material is unnecessary in normal use.
- long brush life ensured by adequate R.P.M. (16m-22m/sec), low
contact pressure and slight development of heat.
|
| |
|
Polishing Bristle Brushes
(Synthetic)
These brushes are extremely economical
and reliable in operation. Several brushes can be assembled together on
a shaft when a wider faced brush is required to deliver a consistent
finish and a uniform rate of cut. |
Abrasive Bristle Brushes (
bottle cleaning type )
Indispensable brushes for cleaning the
inside of holes and finishing non-ferrous metals, steel and cast iron
pieces.Specially suited for the deburring of cross drillings, steering
parts, o-ring slots and cylindrical bores and many other work pieces.
Used either as a hand tool or fixed to
stationary machine these brushes will enable good working results to be
achieved at low costs. |
RJM
Engineering Supplies Pty Ltd
